HOSPITALITY
Hotel Lighting Control Solution
Hotel lighting control shapes how every guest experiences a room — from a crisp, well-lit workspace in the morning to a warm, dimmed ambience at night. This page explains how SOLUXLED hotel lighting control works: a 2.4GHz wireless panel per room stores reading, relax and night scenes, controls brightness and CCT, and removes the extra dimming-bus wiring that adds cost in renovation work. The system fits both new builds and retrofit projects, and scales from a single boutique property to large multi-property hotel groups.
- No dimming bus wiring per room
- Retrofit-friendly for renovation projects
- Consistent scenes across every room type
- Faster fit-out across large room counts Send Project Plan
SCENE MODES
Three Scenes, One Panel
The panel stores 3 memory presets. Each scene is a saved combination of brightness and CCT for the fixtures paired to that room’s panel.
FOCUSED
Reading
Full brightness over the bed or desk, neutral CCT for clarity.
WIND-DOWN
Relax
Dimmed, warm CCT across ambient fixtures for evening comfort.
OVERNIGHT
Night
Low-level path lighting only, minimal glare for late arrivals.
PANEL COUNT
How Many Panels Does One Guest Room Need?
A panel controls one group, so the real question is how many independently controlled zones a room actually needs — for most guest rooms, that’s just one.
Bedroom, entrance and corridor lighting run as one group
1 Panel
Add a second panel for independent bathroom control
+1 Panel (Bathroom)
All three scenes above (Reading, Relax, Night) run from that one room panel and use its full 3-preset memory — more scenes never means more panels.
RECOMMENDED PRODUCTS
What Goes Into a Hotel Room
PROJECT BENEFITS
Why Hotel Groups Choose Wireless Control
01
Save Wiring Cost
No dedicated dimming bus per room
02
Faster Delivery
Less control wiring speeds up fit-out
03
Simple Maintenance
Fixtures and panels swap in independently
04
Better Guest Experience
Consistent, easy-to-use scene control
CASE PREVIEW
Hotel Room Mockup
FAQ
Hotel Project Questions
Yes. Removing the extra dimming-bus wiring is the main advantage for room-by-room renovation work.
2.4GHz RF comfortably covers a standard guest room; see the knob panel spec sheet for open-area range figures.
The standard panel stores 3 memory presets, which comfortably covers reading, relax and night.
Yes, by adding a second panel dedicated to the bathroom. Most standard rooms run fine with just one panel for the whole space.
Our team supports installation guidance, spare parts and warranty terms for hotel-scale rollouts.
NEXT STEP
Ready to Plan Your Hotel Lighting?
For hotel lighting control projects at any scale, our engineering team can prepare a detailed room-by-room panel, fixture and wiring plan within two business days. We also support pilot rooms and sample kits so you can validate the 2.4GHz wireless control experience in one guest room before rolling it out across the property.
- No gateway required
- Receiver built into every fixture
- Scenes stored on-device