2.4GHZ WIRELESS DIMMABLE DOWNLIGHT FOR HOTEL AND HOMES
Wireless Dimmable Downlights
Recessed downlights with the driver and 2.4GHz receiver built in — install like a standard downlight, then dim and tune white from any paired knob panel.
- Built-in driver & 2.4GHz receiver
- Standard recessed cutout sizes
- 2700K–6500K tunable white CCT
- 1–100% smooth dimming
- No external receiver box needed
KEY FEATURES
Built Into the Fixture
Wireless Dimmable Downlight Built-in Driver / Receiver. No external receiver or driver box — everything needed for wireless control ships inside the fixture.
All-in-One Driver
Driver and receiver built into one housing
Tunable White CCT
2700K–6500K color temperature control
Smooth Dimming
1–100% brightness control
Group Control
Address independent fixture groups from one panel
Standard Cutout Sizes
Drops into common recessed cutouts
2.4GHz Wireless
Local RF control — no gateway or cloud needed
SPECIFICATIONS
Fixture Specifications
Reference values for planning — confirm exact figures with our engineering team before publishing or quoting.
|
Parameter
|
Value
|
|---|---|
|
Cutout diameter
|
See detials in Catalog
|
|
Input voltage
|
100-240Vac
|
|
Control protocol
|
Proprietary 2.4GHz RF
|
|
CCT range
|
2700-6500K
|
|
Dimming range
|
1%-100%
|
|
Beam angle
|
15°/24°/36°
|
|
IP rating
|
IP20/IP65
|
|
Housing material
|
Aluminum
|
|
Color options
|
Black/ White, custon on request
|
WORKS WITH
Same Protocol, Whole Product Line
Pairs directly with the knob panel and every other SOLUXLED fixture family on the same 2.4GHz protocol. Each wireless dimmable downlight is factory-paired to the SOLUXLED 2.4GHz knob dimmer panel for group control, 3-memory scene recall, and 1%-100% brightness dimming. Compatible with wireless track spotlights, panel lights and LED strip for whole-project integration.
CONTROL
2.4GHz CCT Knob Dimmer Panel
The 86-box wall panel that drives every fixture group
COMPATIBLE
48V Magnetic track lighting
Spot light and linear modules with wireless dimming
APPLICATION
Where This Panel Gets Installed
Hotel Rooms
Welcome, reading, relax and night scene
Retails Stores
Display, nomal and rest lighting modes
Offices
Work, meeting and rest brightness levels
Residential
One elegant panel for living space
INSTALLATION & PAIRING
Simple Install, Wireless Pairing
01
Cut & Mount
Install into a standard ceiling cutout like any downlight.
02
Connect Power
Wire mains power as usual; the receiver is already inside.
03
Pair to Panel
Press-and-hold pair the track circuit to a knob panel group.
04
Done
No external receiver or gateway to mount.
FAQ
Fixture Questions
No, the 2.4GHz receiver is built into the driver.
Multiple standard sizes are available — confirm current options with sales.
They can share a circuit, but only wireless-enabled downlights respond to panel control.
IP rating depends on the specific model — check the spec sheet for the damp-location option.
NEXT STEP
Ready to Plan Your Downlight Layout?
Send your ceiling plan and room type for a downlight and driver recommendation.
- All-in-one driver+receiver
- Standard cutout compatibility
- Pairs with any knob panel