LED STRIP * 24V
24V LED Strip
Flexible 24V dual color temperature LED strip for cove, under-cabinet and ambient lighting. The 2.4GHz receiver lives inside the power supply, not the strip itself — so the strip stays slim while the driver handles dimming, CCT and pairing.
- 24V dual color temperature (CCT) strip
- 2.4GHz receiver built into the power supply
- Multiple power supply wattages available
- Multiple strip widths and LED densities
- Longer runs than 12V strip with no voltage drop
KEY FEATURES
Wireless Dimmable LED Strip — 24V Linear Lighting
Keeping the electronics in the driver keeps the strip itself slim and easy to route into coves and channels.
Receiver-in-Power-Supply
2.4GHz receiver built into the 24V driver, not the strip
Dual CCT
2700K–6500K tunable white on one strip
Smooth Dimming
1–100% brightness control
Group Control
Blend ambient light into any saved scene
Widths & Densities
Strip options sized to the project
Low Voltage Drop
24V design supports longer runs than 12V
SPECIFICATIONS
Strip & Power Supply Specifications
|
Parameter
|
Value
|
|---|---|
|
Strip voltage
|
24V DC
|
|
Signal receiver location
|
Built into the 24V power supply (not on-strip)
|
|
Power supply wattage options
|
Multiple wattages available, sized to run length
|
|
Strip width options
|
Multiple widths available
|
|
LED density options
|
Multiple LEDs/m options available
|
|
CCT range
|
2700K–6500K (dual color temperature)
|
|
Dimming range
|
1%–100%
|
|
Max run, single feed (no voltage drop)
|
~10m (placeholder, density-dependent)
|
|
Max run, dual-end feed (no voltage drop)
|
~20m (placeholder, density-dependent)
|
|
Cut points
|
Marked cut lines at regular intervals
|
|
IP rating
|
Dry/damp location rating, project-dependent
|
|
Color options
|
White / Custom
|
WORKS WITH
Same Protocol, Whole Product Line
Pairs directly with the knob panel and every other SOLUXLED fixture family on the same 2.4GHz protocol.
CONTROL
2.4GHz CCT Knob Dimmer Panel
The 86-box wall panel that drives every fixture group
COMPATIBLE
48V Magnetic track lighting
Spot light and linear modules with wireless dimming
APPLICATION
Where This Panel Gets Installed
Hotel Rooms
Welcome, reading, relax and night scene
Retails Stores
Display, nomal and rest lighting modes
Offices
Work, meeting and rest brightness levels
Residential
One elegant panel for living space
INSTALLATION & PAIRING
Simple Install, Wireless Pairing
01
Mount the Strip
Install along coves, cabinets or ceiling perimeters using adhesive backing or channel.
02
Connect the Power Supply
Wire the strip to a correctly sized wireless-enabled 24V power supply.
03
Pair to Panel
Press-and-hold pair the power supply’s receiver into an ambient lighting group.
04
Done
Blend ambient light into any saved scene.
FAQ
Strip Questions
It’s built into the 24V power supply, not on the strip itself – so the strip stays slim and the receiver is never covered by mounting channel or diffuserIt’s built into the 24V power supply, not on the strip itself – so the strip stays slim and the receiver is never covered by mounting channel or diffuser
Typically up to about 10m from a single feed point, or up to about 20m feeding power from both ends. Exact figures depend on the LED density and power supply wattage — confirm with our engineering team for your project.
Yes, marked cut points allow custom lengths within each cut segment.
Wattage depends on strip length and LED density — our team can size the correct power supply for your run.
IP rating depends on the specific model — check the spec sheet for the right option.
oltage: 24V DC with built-in 2.4GHz RF receiver. CCT Range: tunable white from 2700K warm to 6500K cool. Dimming: 1%-100% flicker-free brightness via SOLUXLED knob panel. LED Strip Length: customizable per project — cuttable every 50mm. Waterproof: IP20 for indoor / IP65 for bathroom and kitchen cove. Group Control: pair to one 86 wall box panel with magnetic track lights, downlights and panel lights for whole-room scenes.
The wireless dimmable LED strip supports 3-memory scene recall for hotel living rooms, restaurant cove lighting and residential ambient projects. No gateway required. Factory-direct OEM with custom CCT, length and connector options — contact us for catalog and pricing.
NEXT STEP
Ready to Plan Your Strip Layout?
Send your run length and location and we’ll recommend strip density, power supply wattage and grouping.
- Receiver lives in the power supply
- Multiple widths & densities
- Longer runs than 12V strip